FOR ALL READERS SORRY ABOUT THE LATE UPDATE

The reason for the delay is simply that I have been very busy. I have been having lots of meetings of late regards financiers and technical matters. You will see I have temporally withdrawn my gravity file, the reason for this I have had a invite from a very large aero space company to review my data this in addition to the aero space company I am already involved with and I thought it best for then to come to their own conclusions with out biasing then. As soon as the test have been completed I will publish the results , I know I keep saying this on every project, but every time one interested party drops out on a project another one crops up and they all wish confidentiality while discussions go on.

Status of projects

1.Propulsion system, the parts are nearly complete for my new air slide and table tests, another week I guess. [And there is still the zero G flight to be done ]

2. Again confidentiality forbids me saying what I am doing, but for once in a experiment I had a definite conclusion I designed and built a device at the request of a certain party in the course of forty eight hours and it worked perfectly. But as it was a demonstration I did not get paid for it. But I may sometime in the future.

3. IN 1992 I did a lot of work on the Russian NUCLEAR submarine KONSOMOLETS
for the recovery of this vessel, and history has repeated itself, you may find a major newspaper carrying an article on my work and the technology I have developed and tested and this technology can and should be used on the recent sinking of the KIRSK submarine
the article may and I say may appear in the next couple of weeks, I will let you know a day or two before if they do publish.

I will try and do at least one update for next week. Tony. …
 
 

Update report [3] Wednesday 31/5/2000

Most of my projects are on hold at the moment, reason I am in discussion with possible financial backers, Until meetings  have taken place, and I know the extent and what projects they may be interested in, I can not upload any new material for commercial reasons. This state of affairs is only temporally. I would expect to be uploading details of projects within a week or so, one of the first projects to be uploaded will be the Ferro fluid gravity power system. I will be looking for finical backing for this project. the technical risk is high but the rewards even higher.

On another matter for which I hold patents is the below subject i.e. making rain in desert areas I am in contact with Professor S Salter at Edinburgh university who is helping me on this matter, and he in his own right has his own rainmaking project, which may turn out to be better then mine.
We both / jointly require help in this mater i.e. finical help and scientific help / collaboration ,Further we need some one in a tropical area ideally Saudi Arabia to do some simple field trails, if any one can help or no of someone who can help in any of these matters pleas contact me.This part of the world desperately need fresh water any thing that can help will be welcomed
 

Naturally enhanced evaporation ref salt oceanic water to fresh water

Present techniques / desalinisation.

Present systems for large volume desalinisation of salt water for agricultural,
population, industrial, use are largely inadequate.

In the case of third world countries the situation is critical, in desert arid
conditions advancement of lost habitat is a continual ongoing process.

In the more western type  societies such as the middle east typically, Israel,
Jordan large scale evaporation is by artificial means i.e. the boiling off of the salt
for those countries who can afford it nuclear power is available, however this
dose not and will not satisfy demand now, or in the future in addition to which
their is the environmental damage done by the installation and running of  such
power plants.

Proposed system

The most economical process is to enhance the natural oceanic environment were
fresh water is boiled /evaporated  off the oceans and condensed to fall as
precipitation i.e. rain.

The proposed system require neither artificial power or a delivery system i.e.
piping, if done on a large enough scale. It is a enhancement of a natural process,
The key elements are of low cost and simple to manufacture and virtually
requires no maintenance / deployment resulting in little if any environment
damage.

Components

1. Large number of buoyant spheres or other design to achieve the same factors
    i.e. buoyancy /large surface area / and of wetable surface material / capillary
    action.

2. Pontoons or other restricting boons / other to corral and retain the spheres
within a given area.

Description of process

1.  Normal surface ocean burn of is by the suns heat, example one square foot of
area under average sun / wind condition will strip of a certain number of water
molecules, This is a slow process but carried out on a huge natural scale, the
water molecule that is being evaporated is trapped between two environment
systems , i.e. the sun trying to turn it into a gas, and the lower layers of water
acting as a large substrate heat sink trying to retain the water molecule as a
liquid, for this reason the process is very slow but is ongoing on a large scale.

2. If for example you were to separate the water to be evaporated [ burnt off ]
from this huge heat sink the evaporation process would be increased speeded up
enormously and the fresh water yield far greater.

3. This is carried out / made possible in the following manner.
     [A] a flotation sphere with a porous outer surface is floated upon the surface
water[ many spheres ] the spheres our painted black or our of a black nature /
substance, the sphere will float high on the water drawing up liquid from the
lower regions by capillary action / other, were they are separated from the
oceanic heat sink were by the evaporation process is vastly speeded up.

Salt will build up as a result of the enhanced evaporation but will automatically
be cleaned of by the following natural process, natural agitation by wind and sea,
and by the natural tendency for the individual sphere to become top heavy with
encrusted salt and tip over to be washed clean by the sea water.

In addition the sphere  can be designed to biodegrade or to be weighted and sink
as the spheres diameter decreases / wears or cell wall ruptures and sinks, in
either case the result is a environmentally friendly accelerated process , of course the
surface area required to produced a marked effect will be large but of a low cost,
the positions of such systems can be strategically  place to take advantage of the
earth's rotation to prevailing winds to carry moisture into desert area, or the
technique can be used to accelerate natural / artificial reservoirs / open culverts /
pipes systems.

The deployment will be such that the large volume of sea covered will be
systematic and patchwork by nature i.e. in section so that sunlight will not be cut
of from the sea bed or sea environment.

Experiments

1[A]. a one foot area of water in a suitable tank is exposed to natural conditions
         and burn off / evaporation level is noted.
  [B] The same area is subject to coverage by spheres and exposed to a radiated
        artificial source, and the evaporation level noted, it will be seen to be greatly
        enhanced and speeded up.

  [C] The build up of salt will be seen to tip a spheres over on becoming top
         heavy, agitation also achieve the same goal.

The cost of spheres are deemed to be small and are produce for other process
throughout industry in the quantities required a typical size would be fifty mm
diameter and can be made of many different materials.
 

Propulsion system. The zero G flight testing is on hold for the moment, pending some interesting thoughts, I have had, i.e. I have devised a simple experiment that may prove conclusively that the system works [Its always simple to devise these test after you have done something very complicated in the past, then you wonder why you did not do it in the first place.]
In addition to this I am having a technical meeting with the engineering professors to redo some of the previous experiments this meeting will be on the 7 of May I will up date those interested soon after, together with the simple test I have devised of one of the experiments.

Ferro power system
I will be putting up drawings and text quite a lot, soon explaining my thoughts and where I am at probably in a week or so

I will also be writing up each of the projects you will find under the various menu’s, without giving away any secrets for patent reasons
4 Turbine project
 

We have encounted a small problem with the machining of the device, it will be a few weeks before we can remachine.
 
 
 

I was recently asked to analyse a mineral sample in order to determine the atomic content down to 14 p.p.m.

It occurs to me that other people might require this service i.e. I can tell you the makeup of any material if you send me a reasonable sample i.e. 10 Grammes in powder /solid form or liquid results by return of post depending on how I and the Equipment are

Please identify any hazardous or dangerous material Note that the Post office in the UKI is quite Picky when delivering same.
 

Ferro Fluid

I am often asked for 20 cc Samples of Ferro Fluid and the demand is increasing I have arranged for this to be expedited via a separate email address.
 
 
 

I am receiving interest from a number of sources with reference to
 

[A] Sub sea ISE technology

[B] Turbine technology

[C] Propulsion systems

[D] Separation techniques

[E] and people asking for my thoughts for what their worth on their own projects I have done what I can to

help were possible.

Update (1) Report 17th May 2000

Research is continuing on a number of projects below, and discussions are takeing place into the remaining subjects below.

Propulsion system

limited backing is continuing from a large aero space company, and experiments and support is ongoing from two separate universities engineering departments, in addition I hope to be zero G flight testing a prototype of principle of the device. The first of the solid state experiments has proved successful but will have to be redone under more stringent controlled conditions to be confirmed [ lots of room for mistakes hear]

Ferro gravity power system

I have started to reassemble and test the Ferro gravity power source experiment i.e. electricity from the earth’s gravity field, herrott watt university has returned the original equipment have confirmed the first early and simple experiments. To continue the project I require funds and to achieve this aim I hope to attract said funds from the new updated web site, even with funding the device would be at least one year away from a useful prototype, and that given their were no insurmountable obstacles along the way.

For those wishing to support this project the risk is high, but the rewards even higher i.e. low cost electricity.

Turbine project

A version of the turbine [ see automotive menu turbine] has been built a is undergoing testing within the next few weeks by a UK based university.
 
 

I am in contact with companies who are interested in my designs/ concepts upon the following matters and financiers are being discussed

1.sub sea engineering /retrieval/ mining

2. waste separation and identification processes involving high speed computers and 3 meg lasers

3. medical, cellular and virus eradicating systems

4. dome construction techniques

5. backing has been agreed in principle on a household product
 
 

I am trying to interest a goviment [ British ] [Ethiopian] / UN in a simple concept that will enhance / create increased rainfall the system has been tested on my lab bench and works and is of very low cost both to make and maintain / deploy and is enviramently friendly using only solar power. I am receiving help on this matter from a professor at a UK based university engineering section Who also has another rain making project under way in his own right, which may turn out to be better then the one I am proposing, I will update you on this as progress is made.

What the world says about water and concerning system
Fastest SFTP (SSH) anywhere, Go FTP FREE Client