18 Power steering for cars or other vehicles or other devices. For vehicles with out power steering or perhaps installed at manufacture.

This device is relatively inexpensive it could be bought of the shelf in a store like Halfords the device can be fitted in one half hour or their abouts, once installed the vehicle has power steering it can be switched on or of or the amount of power assist can be selected. A working demonstration of the device is available to principle sponsors.

19 Power generation system in the upper megawatt range, this system uses sea water current effects it is not a propeller system, it can be installed in a matter of days / weeks or removed it would be ideal for the Seven barrage type projects it is extremely low cost and does not effect the environment in any way, all the equipment is available but is not being used at present or is or will be surplus to requirements. Multiple units can be used. The principle is established but not being used in the manner I propose. The out put figures cannot be disputed. However when I say relatively inexpensive the project is two expensive for me to support being in the order of 50 thousand two 100,000£ or if the owners of the equipment that is required, which is now standing redundant were to be a partner the cost of a trial set up might be in the order of 20 thousand £ around the cost of a test set up in a MOD test tank, but why make a test model if you can make a working model for the same cost first time round.

Project 20.

UNDERWATER CONNECTER. This is a finished project a demonstration of the system is available to principles who are interested.

The device allows connection under water or above water of any power lines weather low voltage / power or high voltage / high power up to 20 megawatt with a flash over voltage of 39 Kilo volt. The system is extremely low cost with a long life span life span fifty years plus, their are no seals, or glands required other then a minimum separation shield, the simplest box that can hold the mechanism will suffice as the casing i.e. no expensive machining of parts are required. The device can be used at any depth, and is repeatable demateable in any depth of water, seawater can never come into contact with the conductors in-respective of the pressure / depth. A full write up available to principles who may be interested, The system can be used to water proof anything underwater electronics Sonar ect, for example, an exposed printed circuit board and components with a battery supply can be placed in a leaking tin can dropped to the ocean bed and retrieved still in full working order were all the parts are then assessable to be worked on i.e. transistors transformers ect, the unit can be extremely small to be measured in several inches or less. On the other hand the device can be a meter or more and have multiple demateable connecters, which can be plugged in or out underwater at any depth.